ADC Job Setup

Job order

khmerwiz2008 — Thu, 17 Dec 2009 10:24:16 +0000

They don’t have much job order but they still want me to come to work even though I request vacation time.

Tonight I have nothing to do beside get the hot job done. There are a few hot prototype that o need to program.

As shown in this pictue, there are not much job on the shelf.

Leaking

khmerwiz2008 — Sat, 16 May 2009 15:16:18 +0000

this pedal is not safe to operate under the leaking condition. Machine should be lockout entirely.

Who will they blame ?

khmerwiz2008 — Sat, 27 Sep 2008 03:01:47 +0000

Who will they blame for this, let see?

334073.1

khmerwiz2008 — Thu, 14 Aug 2008 06:50:46 +0000

This job need the following bottom die
…..33′…200,500..space 5mm 45,300. The 5mm space between the sets of die is really important. It needs for the 1′ bend (blank 14′).

Leave no space between the set punches.
50,500,500 top punches

This job is the opposit side of job number 334075

350047-702

khmerwiz2008 — Sun, 10 Aug 2008 08:44:05 +0000

Left rail to the first set 46′

Layout

|….46….100,50..10mm space.. 500

319476-704

khmerwiz2008 — Sat, 09 Aug 2008 11:29:38 +0000

——28.5′–300mm–3.5′—100mm–7′–25,40mm

Same top and bottom dies and punches except the top above the 100mm. The punches should 50,45 mm.

345050-704

khmerwiz2008 — Thu, 07 Aug 2008 04:11:45 +0000

This job need only one setup to finish the entire job. Dies and Punches layout as following just for the suggestion.
Measure from the left rails—–20.5′—500,500,25mm. Left no space between the bottom dies.

For the top punches have the following layout:
First sets line on the left egde with the top.
100,200,50,25,40,100 space 500mm. The right edge line up with the top punches

345207

khmerwiz2008 — Sun, 03 Aug 2008 05:37:43 +0000

This job need die and punches
500mm top and bottom, right and easy setup end with xx. Ref Mac# T702

The bottom dies position start from
|…… 44′ ……[500mm]….

345416-703

khmerwiz2008 — Wed, 30 Jul 2008 05:15:45 +0000

Use punches 5 die ev/s w8
—21′–100..300,500…20′…200,40,45
Top and bottom dies/punches are the same lenght.

345387

khmerwiz2008 — Wed, 30 Jul 2008 04:15:37 +0000

100 wing,35,30,100,100 wing 202k
500 evs w8
This job was setup in trupmf 702